Thursday, May 2, 2013
Jaguar S-Type JTB00040NAS2 - Harsh Transmission Shifts or Noise During Shifts
TECHNICAL BULLETIN
Version 2 of this bulletin replaces previously published bulletins JTB00040 & JTB00030
PARTS
NOTE: The additive must only be used in the following cases:
•To fix a transmission noise during gearshifts (squawk).
•It must only be used once in a transmission. The exception to the "use once" rule is if
the transmission has had a complete fluid change, where a second application may be
used on a customer complaint of transmission squawk.
NOTE: The additive must not be used in the following circumstances:
•It must not be used in an attempt to fix any other transmission concerns, for example
noises other than squawk, harsh transmission shifts, or Diagnostic Trouble Codes
(DTC) logged in the transmission control module.
•The additive must not be used on any cars from 2006 MY onwards starting with VINS
S-TYPE: N52048, XJ Range: H00332, New XK: ALL vehicles.
•The additive must not be used more than once in a transmission apart from the
exception described in the second bullet of the NOTE above.
•Do not use the additive as a preventative measure. It must not be used unless there is
transmission noise during gearshifts (squawk) present.
•Do not add the fluid during initial oil fill when a new or remanufactured transmission is
installed.
•The effects of using the additive incorrectly as outlined above may be reduced friction
of the clutches leading to poor shift quality, logged DTCs, and it can also induce flare.
C2C 37157...............Transmission fluid additive Qty 1
ou can Download Jaguar S-Type Below, After Specifications. If the information you are looking for less, you can use the sponsored links to get related information
Get the file Download here